
Measure the mechanical properties of your materials as a function of time, temperature, and frequency with the TA Instruments DMA 850. Equipped with a gas cooling accessory allowing for measurements in the -150C to 250C range, you can quantify the elastic (spring-like) versus viscous (fluid-like) components of the sample response which is crucial for reliable and complete viscoelastic property characterization such as Storage Modulus, Loss Modulus, and Tan delta. Available clamps are the dual/single cantilever, tension, 3-point bend, shear sandwich, compression, and submersion film. Sample sizes vary by clamp.
Deformation Modes/Clamp | Sample Sizes |
Dual/Single Cantilever | 8/4 mm (L), Up to 15 mm (W), and 5mm (T) |
20/10 mm (L), Up to 15 mm (W), and 5 mm (T) | |
35/17.5 mm (L), Up to 15 mm (W), and 5 mm (T) | |
3-Point Bend | 5,10, or 15 mm (L), Up to 15 mm (W), and 7 mm (T) |
20 mm (L), Up to 15 mm (W), and 7 mm (T) | |
50 mm (L), Up to 15 mm (W), and 7 mm (T) | |
Tension Film/Fiber | 5 to 30 mm (L), Up to 8 mm (W), and 2 mm (T) |
Shear | 10 mm square, Up to 4 mm (T) |
Compression | 15 and 40 mm diamter, Up to 10 mm (T) |
Submersion Tension | Fixed at 15 mm (L), Up to 8 mm (W), and 2 mm (T) |
Lab:
Location:
MRL 1051
Manufacturer's Info:
TA Instruments DMA 850
TA Instruments
159 Lukens Drive
New Castle, DE 19720
Ph: 302-427-4000
https://www.tainstruments.com/products/rheology/dynamic-mechanical-analy...
Instrument Information and/or Manual:
Attachment | Size |
---|---|
![]() | 2.96 MB |
![]() | 177.96 KB |
Contact:
Please contact Dr. Rachel Behrens (rachel [at] mrl [dot] ucsb [dot] edu) to schedule training. Before training starts, please read the MANUAL.